Download

Download the most updated technical documentation of the product

download

Accessories

No acessories available for this product

Energon

ENERGON is an innovative digital controller for fan-coil units. Compact dimensions but owerful and flexible hardware with 20 Inputs/Outputs. ModBusRS-485 communication. Proprietary Bus to connect more controllers to a single room sensor. Removable terminal plugs for: power supply, high power signal, low power signal. Digital room sensor with adjustment for: set point,fan speed (manual or automatic), Economy/Comfort mode. 6 Analog/Digital Inputs for sensors and remote function selection (e.g. Change/ Over, Economy, Window Contact and more). 2 Analog Output (0..10Vdc) for modulating valves and modulating fan speed control. 7 HighVoltage Digital output for valves control and 3 fan-speed control. Digital Inputs: Winter/Summer change over, Economy mode, Remote power off (OccupancySensor), Windows contact. Digital Outputs for External Relays: Electrical heater, Electrical Power enable. Universal power supply from 85 to 265 Vac. Control possibilities:
• On-Offvalves + 3 fan-speed control
• 3posFloating valves + 3 fan-speed control
• On-Offvalves + Proportional 0..10Vdc fan-speed control
•Modulating valves + 3 fan-speed control
•Modulating valves 0..5Vdc & 5..10Vdc valves + Proportional 0..10Vdcfan-speed control

Room Sensor available in 2 colors (black & white) external frame available in many different colors. Flush mounting or wall mounting. Functions: On/Off/EconomyMode set, fan speed selection (Auto/3/2/1/0), temperature set point adjustment, multi-color leds (red-green-orange) showing operating mode (Off-Comfort-Economy). User may have full control or limited control or no control.


Free of charge Configuration Software  (Download) for setting of all parameters, overview on the plant installation showing the key variables for each individual controller, setting of daily & weekly time schedules.


Graphic Display Panel (MT-NET-PONR). Pre-programmed panel ready to control up to 50 controllers, allowing daily (6 per day) and weekly (3 per week) time schedules, web server capabilities, remote monitoring and supervisory through Internet Explorer. Configurable features through dip-switches on the electronic board: Stand Alone or Network integrated, 2 Pipes or 4 Pipes FCU, valve control (On/Off or proportional) and fan speed control (3 fan-speed or proportional), ModBus address setting.  User-friendly supervisory achieved by direct connection to Controlli GT touch-screens.


NR9000

Fan Coil Controller for DIN Mounting.


NR9000-RT

Room digital sensor with display and 4 buttons for fancoil control, fan speed and setpoint. Available in two colors black & white and for flush mounting or wall mounting


NR9000-TC

Infrared Remote to be used in combination with the receiver NR9000-RX connected to the controller. NR9000-TC allow the user to change the temperature set point, the ventialtion speed, the operating mode (e.g. ventilation only, heating, cooling or auto). The user can also set simple time schedule with 1 start and 1 stop per day.


NR9000-RX

It has to be used in combination with the remote NR9000-TC and it is able to receive the infrared command coming any NR9000-TC.
The receiver module is equipped with 2 signalling LEDs:
• GREEN LED to show the controller status (LED ON = controller ON, LED OFF = controller OFF);
• YELLOW LED to show the time table status (LED ON = time table enabled, LED OFF = time table disabled).
The GREEN and YELLOW LED briefly blink when they receive a signal coming from the remote control. Further than the two LEDs the receiver module is equipped with a button to override the switching on and switching off of the controller. If time table are enabled, by pressing the button they will be disabled.